Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK 1.4 - Manual (Page 27)

25
i.MX31 PDK 1.4 Quick Start Guide
4
Using the Demo Image
This chapter explains how to use the touch panel and stylus to load the multimedia content
to the 3-Stack board, using the provided demo image.
Multimedia Codecs Content
The Windows CE 5.0 and Windows Embedded CE 6.0 Demo Images contain a set of
multimedia codecs that support various use cases. These codecs are optimized to run on
the i.MX31 platform.
See the Demo Image Readme document, provided with the demo image, for a full list of
the codecs provided.
These codecs are provided for demonstration purposes; therefore, they will only playback
the content for 30 seconds.
For more information about the multimedia codecs, or to obtain evaluation copies, please
contact a Freescale sales representative or distributor.
Touch Pad Calibration Tool
After you have assembled the 3-Stack board and powered it up, the Windows CE 5.0 or
Windows Embedded CE 6.0 image that was loaded to the board will boot up. The first
3StackQS_WinCE.book Page 25 Sunday, September 28, 2008 1:58 PM