Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK 1.4 - Manual (Page 31)

Using the Demo Image
Downloading Multimedia to the 3-Stack Board
29
i.MX31 PDK 1.4 Quick Start Guide
3. Use the A to mini AB USB cable provided in your i.MX31 MAX WPDK kit and
connect the mini AB end to the J10 USB OTG connector on the Personality board,
then connect the other end to the any available USB port on your Host PC.
Windows will recognize the 3-Stack board as a Windows CE 5.0 or Windows
Embedded CE 6.0 Device and the Active Sync wizard will appear on the Host PC
(Figure 4.3).
Figure 4.3 Setting up a Partnership
3StackQS_WinCE.book Page 29 Sunday, September 28, 2008 1:58 PM