Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK 1.4 - Manual (Page 29)

Using the Demo Image
Touch Pad Calibration Tool
27
i.MX31 PDK 1.4 Quick Start Guide
To calibrate the Touch Panel, follow these steps:
1. Using the stylus pen, click on the cross.
The cross will move to the four corners of the screen. If the calibration error is too
large, the program will reset and the process will have to be repeated. When the touch
panel calibration is successful, the following message is displayed:
2. Tap with the stylus pen in any part of the screen.
The Windows CE desktop is displayed (see Figure 4.2.).
Figure 4.2 Windows CE Desktop
3StackQS_WinCE.book Page 27 Sunday, September 28, 2008 1:58 PM