Freescale Semiconductor Windows Embedded CE 6.0/Windows CE 5.0 i.MX31 PDK 1.4 - Manual (Page 25)

Build the Platform
Build a Demo Platform: Assemble Two Boards
23
i.MX31 PDK 1.4 Quick Start Guide
Connect Power Supply; Run Preloaded
Demo
Figure 3.6 Connect Personality Board to Power Supply
1. Connect the regulated 5V power supply to the appropriate power adapter. Plug the 5V
line into the J12 (5V POWER JACK) connector on the Personality board. See Figure
3.6 . Turn the 5V power supply ON.
2. The OS image pre-loaded in the 3-Stack should boot and the Windows CE 5.0 or
Windows Embedded CE 6.0 operating system should appear at the Personality board’s
LCD display.
CPU/Personality Board
DC
power
Regulated +5V
DC Supply
J12 power jack is on the underside
of the Personality board
1
2
3StackQS_WinCE.book Page 23 Sunday, September 28, 2008 1:58 PM