Furuno FAR-2827 - Manual (Page 48)

3. SETTING AND ADJUSTMENT
3-10
INSTALLATION menu setting
Open the INSTALLATION menu by pressing [4] key on the INITIALIZE menu.
[INSTALLATION]
1 BACK
2 RADAR*
MAIN/SUB
3 RANGE UNIT **
NM/SM/km/kyd
4 RADAR NO***
1/2/3/4/5/6/7/8
5 RADAR POSN
FORE/MAIN TOP/
MAIN 2ND/MAIN 3RD/
AFT/PORT/
STAR BOARD
6 MODEL
6/12/25 UP/25 DOWN/
50/30 UP/30 DOWN/60
7 TYPE
IMO/A/B/C/W
8 ON TIME
XXXXXXX.X H
9 TX TIME
XXXXXXX.X H
0 PM GAIN ADJ
0
**: non IMO-type only.
***: No.1-4: with antenna unit
No.5-8: without antenna unit
*: Cannot be selected.
RADAR
Choose main radar or sub radar.
RANGE UNIT
Choose NM, SM, km or kyd (kilo yard) as appropriate, however-IMO type radar is “NM”
only.
RADAR NO and RADAR POSN
For multiple radar system using the network hub, set number (name) and antenna position
for each system to easily distinguish the radar configuration.
MODEL
Confirm the model of your radar. If the setting of this item is different from your model
(combination of the antenna unit), the radar functions abnormally.
12: for FAR-2117/FAR-2817/ FAR-2117-BB
25UP: for FAR-2127/FAR-2827/ FAR-2127-BB
TYPE
Choose type of radar: IMO, A, B, C, or W.