System configuration – Furuno FAR-2827 User Manual
Page 8
vi
SYSTEM CONFIGURATION
PROCESSOR UNIT
RPU-013
EPFS
(Navigator)
IEC-61162 Serial Data
(Input/Output)
IEC-61162 Serial Data
(Input)
SDME
(Speed Log)
Gyrocompass
AIS
Track Control Unit
: Option
: Dockyard supply
: Standard
Rectifier
RU-3424
RU-1746B-2
AD-100
MEMORY CARD
INTERFACE UNIT
CU- 200-FAR
VDR
External Monitor
Sub Display
Alarm***
MONITOR UNIT
MU-201CR (CAT1)
(FAR-2117/2127)
or
MU-231CR (CAT2)
(FAR-2817/2827)
CONTROL UNIT
RCU-014
(Standard)
or
RCU-015
(Trackball)
Control Unit
RCU-016
(Remote)
Transformer Unit
RU-1803
FAR-2117/2817: XN12AF-RSB-096-078
XN12AF-RSB-097-078
XN20AF-RSB-096-078
XN20AF-RSB-097-078
XN24AF-RSB-096-078
XN24AF-RSB-097-078
FAR-2127/2827: XN12AF-RSB-096-079
XN12AF-RSB-097-079
XN20AF-RSB-096-079
XN20AF-RSB-097-079
XN24AF-RSB-096-079
XN24AF-RSB-097-079
ANTENNA UNIT
Gyro Converter
GC-10
DC spec
AC spec
Performance Monitor
JB
JB
24 VDC
or
100-230 VAC
100/110/115
220/230 VAC
RU-3423
24 VDC
*
Category of Units
Antenna Unit: Exposed to weather
All other units: Protected from weather
Switching HUB
HUB-100
**
**
1)
2)
3)
1) Connect the EPFS which is approved in accordance with the requirements of the IMO in
resolution MSC.112(73) is used.
2) Connect the SDME which is approved in accordance with the requirements of IMO in
resolution MSC.96(72) is used.
3) Use the gyrocompass having an update rate that is adequate for the ship’s rate of turn.
*: For FAR-2117-BB/2127-BB a monitor unit is prepared by user. See page 1-6.
These monitors have been approved by the IMO, MU-201CR for CAT 2, MU-231CR for
CAT 1. If a different monitor is to be used, its effective diameter must meet the applicable
Category requirements: CAT 1: effective diameter 320 mm or higher, CAT 2: effective
diameter 250 mm or higher. Refer to their operator’s manuals for details.
**: Junction boxes are required for more than 100 m antenna cable.
***: Contact output for Alarm
(Load current) 120 mA (Polarity) No.1, 2: Normally Close, No.3, 4: Normally Open
Serial I/O for alarm is also possible, which complies with IEC 61162-1.