FireplaceXtrordinair Revolution 36CF - Manual (Page 15)

Installation
(for qualified installers only)
15
© Travis Industries 4090102 100-01212_000
Battery Pack / Learn Switch Installation
•
The battery pack and learn switch must be mounted inside a junction box in a location that
may be reached by the 12’ long battery box wires (see Figure 8).
Staple the two wires near the junction
box. This prevents the wires from
slipping out of the junction box while
the batteries are replaced. Take care
to prevent damage to wires.
Junction Box
(not supplied)
Battery Box and Learn Switch
(placed inside the junction box)
Remote Holder - used to cover the
junction box. It is removed to
replace batteries and access the
learn switch
Battery Box Wire
Remove the Control Box to access the battery box wire. See the
illustration on the following page for wiring details.
Wire Length = 12'
Do not route the wires over the top
of the fireplace.
Figure 8