FireplaceXtrordinair Revolution 36CF - Manual (Page 7)

Installation
(for qualified installers only)
7
© Travis Industries 4090102 100-01212_000
Packing List
•
Glass LatchTool
•
Log Set with Embers and Rock Wool
•
Remote Control with Wall Mount
•
LP Conversion Kit (2 orifices and 1 rate screw)
•
Battery Box
•
Learn Switch with 12’ Battery Box Wire
•
Andiron Brackets (4)
•
Fiber Board
Additional Items Required
•
Firebacks (SKU 96100177 or 96100178)
•
1080/36 CF Direct Vent (available only from Travis Industries – see page 19 for part numbers)
•
Gas Line Equipment (shutoff valve, pipe, etc.)
•
Electrical Equipment
Recommended Installation Procedure
1. Frame the opening for the fireplace. We suggest omitting the framing above the header to
allow for easier vent installation.
2. Place the fireplace in place, making sure it is level and plumb. Attach using the nailing
brackets.
3. Install the vent, electrical connection, gas line, and battery box. Install power heat duct (if
being used).
4. Install the framing above the header.
5. Install the hearth (if applicable).
6. Install the included non-combustible facing.
7. Install the facing.
8. Install the mantel (if applicable).
9. Finalize the installation (see page 36).