GE GFK-1852 - Manual (Page 14)

GFK-1852 Chapter 1 Introduction and Quick Start 1-7
Introduction and Quick Start
1
Once you press the Enter key, the following VMSE Configuration screen
will appear:
Figure 1-7. The VMSE Configuration Screen
H. Type s to save the IP address in the VMSE. (It is not necessary to press the
Enter key.) The “Connection to host lost” Telnet dialog box will appear (this is
normal) shown in the next figure:
Figure 1-8. The “Connection to host lost” Telnet Box
I. Click the OK button in the “Connection to host lost” Telnet dialog box to close
it, and then close the Telnet box.