Srtp/snp firmware – configuration setup, Network/ip settings, 4srtp/snp firmware – configuration setup – GE GFK-1852 User Manual
Page 27
Advertising
GFK-1852
Chapter 4 Configuration
4-5
Configuration
4
SRTP/SNP Firmware – Configuration Setup
Figure 4.1 shows the Main Configuration screen for SRTP/SNP Firmware.
Figure 4-1. SRTP/SNP Firmware Configuration Screen
When finished with this screen, you have three choices:
•
Press the “S” key to exit and save your changes.
•
Press the “Q” key to exit without saving your changes.
•
Press the “D” key to return to the default settings.
Network/IP Settings
To change the Network/IP settings, press ‘1’. The following values can be
set/changed: IP Address, Gateway Address, NetMask.
Advertising