GE GFK-1852 - Manual (Page 20)

2-2 VersaMax Serial to Ethernet Adapter User's Manual – July 2000 GFK-1852
2
Network Interface
The VMSE supports 10 Mbit Ethernet through its RJ45 (10BaseT) connector.
Hardware Address (MAC Address)
The first three bytes are fixed, and read 00-20-4A. The fourth, fifth, and sixth bytes
are unique for each VMSE and are used to generate the serial number. The address is
in Hex notation.
Power Requirements
The VMSE is not shipped with a power supply. The required input voltage can vary
between 9VDC and 30VDC with a maximum of 3 Watts. The VMSE can be
powered from the 24 Volt supply on the VersaMax, Series 90-30, or an external
supply can be used. Take care not to exceed the capacity of the VersaMax or Series
90-30 power supply.