GE GFK-1852 - Manual (Page 18)

GFK-1852 Chapter 1 Introduction and Quick Start 1-11
Introduction and Quick Start
1
Once you finish configuring all of the parameters in the selected group (“CH1 Serial
& Protocol Settings” in the above example), you will be returned to the Command
Prompt where you can continue editing parameters or you can exit.
Be sure to type S if you desire to save your changes when exiting.
Modbus
 is a trademark of Gould, Inc.
MS-DOS
 is a registered trademark of Microsoft, Inc.
CIMPLICITY
, Logicmaster, Series 90-30, Series 90-70, Series Six,
VersaMax
, and VersaPro, are trademarks of GE Fanuc NA.