Golden Technologies GP601 SS - Manual (Page 17)

Compass Onwer’s Manual – Models GP600 SS, GP600 CC, GP601SS, GP601 CC Revised 060208
17
COMFORT SETTINGS
Adjusting the seat with a front to rear angle
Loosen seat guide adjusting bolts using a 6mm Allen wrench provided in the charger
bag and a pair of pliers or a 13mm open end wrench. Place the seat receivers in the
lowest position and insert the ball detent pins through the towers and seat receiver
legs. Leave the seat guide adjusting bolts loose. Slide the seat into the receivers,
adjust seat to the desired height and angle using the (4) detent pins. Leave the seat in
the seat receivers and tighten the seat guide adjusting bolts. This process is more
easily accomplished with two people. Note: seat receivers must be 2” higher when
using NF22 battery cover.
Seat
Tower
Seat Guides
Front Seat Locking
Handle
Bottom of
Seat
Seat
Guide
Adjusting
Bolts
Seat Angle
Adjusting Pins