Golden Technologies GP601 SS - Manual (Page 18)

Compass Onwer’s Manual – Models GP600 SS, GP600 CC, GP601SS, GP601 CC Revised 060208
18
COMFORT SETTINGS
HEADREST HEIGHT ADJUSTMENT
1. Push and then release the clamp on the left post of the headrest while you are
pulling up or pushing down on the head rest. See figure 10.
2. The headrest will “click” to a stop in one of the preset positions.
3. Repeat step 1 until the headrest is at the desired height.
Figure 10 Figure 11
BACKREST ANGLE ADJUSTMENT
NOTE: The backrest can be folded down to minimize chair
height during transport.
1. Pull up on the adjustment lever (see figure 11) and push against the backrest until
the backrest is in the desired position.
2. Release the lever.
3. To return the backrest to the upright position, pull up on the lever and move the
backrest to the desired position.
Backrest Angle
Adjustment Lever
Headrest Clamp