Operation – Golden Technologies GP601 SS User Manual
Page 28
 
Compass Onwer’s Manual – Models GP600 SS, GP600 CC, GP601SS, GP601 CC Revised 060208
28
OPERATION
 
 
Figure 20
Reset Button 
If the main circuit breaker trips, please wait for approximately 1 minute and 
then push the reset button to reset the main circuit breaker. See figure 20. 
NOTE: Usually, the thermal rollback feature is more sensitive than the main
circuit breaker. We recommend that you turn off the power to the chair 
and wait for five minutes when the chair suddenly loses speed or power. 
Doing so will allow the overheated electrical components to cool to their 
normal operating temperatures.  
SWING-AWAY DESK ARM  
Your Compass
™
is equipped with a swing-away desk arm that provides you with the
convenience of positioning your chair close to a work surface such as a table or desk.
To swing the desk arm simply push on the side of the joystick until the joystick swings 
to the retracted position. See figures 21, 22, and 23. 
 
Figure 21 Figure 22 Figure 23
 
 
Reset Button
(circuit breaker)