Generac 1403-0 User Manual
Generac, Power transfer system with dual load manager, Owner’s manual
This symbol points out important safety instructions, which, if not followed, could endanger the personal safety and/or
property of yourself and others. Read and follow all instructions in the manual before attempting to operate this unit.
Model No. 1403-0 Power Transfer System Manual No. B4610 (Revision 2, 1/28/2000)
Power Transfer System with Dual Load Manager
aking your system
back to the store,
call the generator
MF 85 CT
The Model 1403 Power Transfer System safely connects up to twelve essential household loads, such as the
furnace fan, freezer, refrigerator, water well pump, sump pump, lighting or outlet circuits to either the utility power
or a portable generator. In the event of a utility power failure, the homeowner can safely select devices to be
powered by an outdoor portable generator. Self-contained load meters assist the operator when managing power
loads. The power transfer system will not permit connection to both utility and generator power at the same time.
The Model 1403 Power Transfer System is easy for a licensed electrician or qualified professional to install, safe
for a homeowner to operate, and will work with 240 Volt AC generators factory equipped with a NEMA type
This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE.
This product must be installed in compliance with local residential wiring and electrical codes by a
licensed electrician or qualified professional. Generac Portable Products is not responsible for
damaged equipment, accidents, or personal injury caused by incorrect installation.
Read this Safety Manual and Instructions BEFORE operating Power Transfer System.
Installation Instructions - - - - - - - - - - - -Page 1 through 12
Owners Operating Procedure - - - - - -Page 13 through 16