GE EPM 3000P - Manual (Page 25)

Chapter 5 General Procedure Overview
5.3 P ROGRAMMING M ODE E NTRY
U
SED FO R
P ASSW O RD
E
NTRY
M AX/M IN
LIM ITS
VO LTS A M PS
PR IN T
PR O G
PH ASE
N EXT
U SED FO R P RO G RAM M IN G
BUTTON FUNCTION DESCRIPTION
MAX/MIN/LIMITS ADVANCE Scrolls groups, functions, and advances to exit point from function and
group level.
PRINT/PROG CHANGE
VALUE
Scrolls packs, digit counters, and changes Switch PACK position UP or
DOWN.
VOLTS STORE Activates new data entry, stores digits, and enters or exits from group or
function level.
5.4 S
TANDARD N UMERIC D ATA E NTRY
Programmable FUNCTION values are always three digit numeric fields designed to accept any value
between 000 and 1999. When entering the value of a function enter all three digits, leading zero's
included. For instance, to enter 25, enter: 025.
When activating the Data Entry Sequence, certain Functions allow for a four digit entry. The display
indicates a blank followed by three dashes (see diagram). The first digit may only be a 1 or a blank (the
blank signifying 0). Press PRINT/PROG ONCE for 0, TWICE for 1.
GE Industrial Systems
20