GE NetworX NX-7002 - Manual (Page 18)

LOCATION 62
NAME OF GPRS ACCESS POINT - APN, characters 33 - 48 (16 segments)
See location 60.
LOCATION 63 NAME OF GPRS ACCESS POINT - APN, characters 49 – 64 (16 segments)
See location 60.
LOCATION 64 -
LOCATION 100 RESERVED
LOCATION 101 DHCP ASSIGNED IP ADDRESS (4 segments)
When the NX-7002 logs into the GPRS network, it is automatically assigned to an IP address.
This location is a read-only location.
LOCATION 102 IP ADDRESS FOR TCP/IP RECEIVER 1 (4 segments)
If using TCP/IP reporting, enter in this location the IP address of the receiver 1.
LOCATION 103 IP ADDRESS FOR TCP/IP RECEIVER 2 (4 segments)
If using TCP/IP reporting, enter in this location the IP address of the receiver 2.
LOCATION 104 –
LOCATION 118 RESERVED
LOCATION 119 RECEIVER ALARM AND POLL PORT (4 segments)
The number of the TCP/IP port to which polling and alarms are reported. The default port is
9999 and under normal circumstances should not be changed.
LOCATION 120 –
LOCATION 138 RESERVED
LOCATION 139 TCP/IP 1 ACCOUNT NUMBER (8 segments)
The SIA or Contact ID account number used for reporting towards the TCP/IP receiver. SIA
account numbers are 6 digits long. Contact ID account numbers are 4 digits long. Add leading
zeros to create an 8-digit number.
LOCATION 140 TCP/IP 1 RECEIVER NUMBER (4 segments)
The phone line receiver number associated with the TCP/IP 1 account.
LOCATION 141 TCP/IP 1 LINE NUMBER (4 segments)
The line number associated with the TCP/IP 1 account. Enter the account number and
destination number for the receiver.
LOCATION 142 TCP/IP 2 ACCOUNT NUMBER (8 segments)
See location 139.
LOCATION 143 TCP/IP 2 RECEIVER NUMBER (4 segments)
See location 140.
NX-7002 Installation manual Page 18 09/02/05