GE NetworX NX-7002 - Manual (Page 22)

LOCATION 165
SMS 2 PHONE NUMBER (20 segments)
See location 163.
LOCATION 166 SMS 2 FORMAT (1 segment)
See location 164.
Note: By default, not more than 20 SMS messages will be transmitted in a 24 hour time
period. If needed, this number can be changed (see location 162 segment 3).
LOCATION 167 SMS SERVICE CENTRE NUMBER (20 segments)
This number is mandatory when SMS reporting is used. Usually the SIM card automatically
dials this number. “14” indicates the end of the phone number. Program “11” to insert “*” in the
phone number, program “12” to insert “#” and program “13” to insert “+”. It is recommended to
add the country prefix before the number. For example, +32 followed by the number.
LOCATION 168 UPLOAD/DOWNLOAD PHONE NUMBER (FOR CSD GSM) (20 segments)
This number is mandatory if up/downloading via the NX-7002 is required using the call-back
feature. An Up/download call will use the data channel. Contact your network provider to
make sure your SIM card supports the data channel.
Program the call-back number in this location. “14” indicates the end of the phone number.
Program “11” to insert “*” in the phone number, program “12” to insert “#” and program “13”
to insert “+”.
LOCATION 169 GSM SIM PIN CODE (8 segments)
Enter the SIM pin code in this location. A “10” indicates the end of the code.
LOCATION 170 GSM OPERATOR SELECTION (6 segments)
The network operator ID code. Set this to 00000 to allow the SIM card automatically select a
network operator. Alternatively, enter an operator ID code in this location to manually select a
network operator. If using a 5-digit code, enter ‘A’ or ‘10’ after the code. Appendix 2 lists all
network operators and ID codes. An invalid selection or unreachable network will prevent
location 174, segment 3 turning on.
LOCATION 171 CURRENT GSM OPERATOR (READ ONLY) (1 segment)
This location will show the name of the automatically or manually selected GSM network
operator. This location is read only and only valid when the NX-7002 is logged into the GSM
network. See Appendix 2: Operator ID Codes for a detailed list of operators.
LOCATION 172 CURRENT GSM RSSI (READ ONLY) (1 segment)
This location will show the RSSI (Received Signal Strength Indicator) value. The RSSI value is
periodically updated when logged into the network. RSSI values range from 0 to 31 with 99 as
unknown. See Testing the RSSI value for more information.
LOCATION 173 CURRENT GPRS BIT ERROR RATE % (READ ONLY) (1 segment)
This location will show the BER (Bit Error Rate) value in %. The BER value is periodically
updated when logged into the network. BER values range from 0 to 7 with 99 as unknown.
NX-7002 Installation manual Page 22 09/02/05