GN Netcom ELT 560 - Manual (Page 29)

Syste
m
Se
tu
p Men
u
S y s t e m S e t u p M e n u [ 2 8 ] w w w . u n i d e n . c o m
Vibrate All
The vibrate alert causes the handset to vibrate when an
incoming call is received. For safety reasons, the handset will
not vibrate while it is charging in base. To turn on the Vibrate
Alert for all incoming calls, intercom pages, etc., go to
V ib r at e
A l l and select On . A confirmation tone tells you that Vibrate
Alert is active.
Call Vibrate
You can choose a vibrate pattern (4 patterns (1-4) and Off). To set Vibrate Alert, go
to
Vi br a te Pe t te rn and then select the pattern. Selecting OFF will turn off the
vibrate feature for incoming calls only. A confirmation tone tells you that Call
Vibrate is active.
Customize Your Own Distinctive Ringer Tones (Handset Only)
Your phone can store up to 5 different
recordings to use as ringer tones (a
total of 100 seconds). Each recording
must be less than 20 seconds long.
8KDTCVG#NN
1P
1HH

5'.'%6
To the
sound source
To the
headset jack
(Ringer Options)
Call Vibrate
Vibrate All
UP742.book Page 28 Thursday, February 3, 2005 9:39 PM