GN Netcom ELT 560 - Manual (Page 41)

Usi
n
g Y
o
ur Phone
U s i n g Y o u r P h o n e [ 4 0 ] w w w . u n i d e n . c o m
Speaker: Adjust the handset speaker volume
You can choose from six volume levels for the handset
speakerphone. To adjust the speaker volume, go to Speaker Setup
menu, and select
S pe a ke r V ol u me select the volume level you want
to use.
You can also adjust the handset speaker volume during a call by
pressing the or key on the side of the handset, and then up
(to make it louder) or down (to make it softer).
Audio Tone
If you aren't satisfied with the audio quality of your phone, you
can adjust the Audio Tone of the earpiece. Your phone gives you
three audio tone options: low, natural or high. Go to Speaker
Setup menu, and select
A ud i o T on e and select the option that
sounds best to you.
(Audio tone adjustments only apply to the earpiece, not the
speakerphone.)
Mute
While the handset is ringing, you can mute the handset ringer for this call by
pressing end on the handset.
Mute the Handset Microphone
When you're on the phone, press the OPTIONS key and select Mute to turn off the
microphone so the caller can't hear you. The display shows
M ut e O n while the
microphone is muted. To turn off muting, repeat the above step again.
5RGCMGT
5'.'%6
8QNWOG
#WFKQ6QPG
5'.'%6
.QY6QPG
(Speaker Setup)
Audio Tone
Speaker Volume
UP742.book Page 40 Thursday, February 3, 2005 9:39 PM