GN Netcom ELT 560 - Manual (Page 35)

Usi
n
g Y
o
ur Phone
U s i n g Y o u r P h o n e [ 3 4 ] w w w . u n i d e n . c o m
Using Your Phone
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Press talk/flash.
4) Listen for the dial tone.
5) Dial the number.
OR
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Dial the number.
If you need the phone to pause before dialing more digits (for example, to enter
an access code or extension), press menu/select, and select
P au se En t ry from
the list. P appears in the display, which represents a 2-second pause.
4) Press talk/flash.
From the Handset Speakerphone
1) Remove the handset from the charging cradle.
2) Flip the top panel up.
3) Press (Speaker Phone) on the side of the handset.
4) Listen for the dial tone.
5) Dial the number.
6) When the other party answers, talk into the microphone
in the bottom of the handset.
•When you dial the
number, hyphens are
inserted between
numbers.
•If the line is already in
use, all registered
handsets that are not
currently in use will
display "
InUse. "
•For best performance,
use the speaker phone
in a quiet room and let
the caller finish
speaking before you
speak. If you or the
other party has
difficulty hearing,
adjust the speaker
volume.
note
UP742.book Page 34 Thursday, February 3, 2005 9:39 PM