GN Netcom ELT 560 - Manual (Page 56)

Multi-Handset F
e
ature
s
[ 5 5 ] M u l t i - H a n d s e t F e a t u r e s w w w . u n i d e n . c o m
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 11.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the main base's ability to make or
receive telephone calls. You must set
both handsets to DirectLink Mode to
make a directlink call.
To enter DirectLink mode, Select Direct
Link option in the main menu. And then
press the ENTER soft key.
Di re c t L in k
M o de co m pl et e . appears.
To make a DirectLink call, press the DirectLink soft key. Select
the handset you want to call. To cancel the call, Press end. To
answer a DirectLink call, Press talk/flash or . Press end when
you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
5'.'%6
  &KTGEV.KPM
•If the party is out of
range, Unavailable
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
Intercom DirectLink
Monitor, they cannot
be used to make or
receive calls. Other
handsets can still make
and receive calls.
note
UP742.book Page 55 Thursday, February 3, 2005 9:39 PM