Go-Video DDV9355 - Manual (Page 11)

2 DUAL - DECK USER ’ S GUIDE
IN
(FROM ANT.)
RF OUT
(TO TV)
AUDIO
VIDEO
LINE
OUT
CH
3 4
Connect Antenna/Cable to VCR
Connect Antenna/Basic Cable
1
2
3
Follow these steps only if you
are using an indoor/outdoor
antenna or basic cable. If you
have a:
• Cable Box
• Stereo Receiver
• TV Monitor
• Third VCR
• Laserdisc Player
• DVD Player
• Camcorder
• Satellite Receiver
• Video Game
...or other advanced connection,
please refer to Chapter 12.
4
CH
3 4
From Antenna
or Cable
To TV
Connect the RF antenna cable from your
indoor/outdoor antenna or cable wall outlet
to the IN (FROM ANT.) jack on the back
panel of the VCR.
Connect VCR to TV
Connect the supplied RF cable from the
OUT (TO TV) jack on the back panel of the
VCR to your television’s ANTENNA IN jack.
Set VCR Output Channel
Set the channel switch on the back panel of
the VCR to 3 or 4, whichever is not an
active channel in your area.
Plug In VCR
Connect the VCR power cord to a standard
120V/60Hz wall outlet.
IN
(FROM ANT.)
RF OUT
(TO TV)
AUDIO
VIDEO
LINE
OUT
CH
3 4