Go-Video DDV9355 - Manual (Page 69)

60 DUAL - DECK USER ’ S GUIDE
Tape Missing
There is no videotape in the recording deck.
• Insert a videotape in the recording deck.
Tape Missing Tab
The videocassette is missing the Record Safety Tab.
• Insert a video cassette with the Record Safety Tab
intact, or place a small piece of adhesive tape
over the opening to permit recording.
Not Ready
The recording Deck is not in Stop mode (e.g., it is
playing, rewinding, etc.).
• Press Stop to stop the recording deck.
Timer Recording Errors
If there is a problem with your
Timer Recording, the word
Timer will flash on the Front
Panel Display and an error
message will appear on the
On-Screen Display. Once you
correct the error, the event will
begin if there is still time
remaining for that event.
Copy Tape
Deck Deck
Power
Deck Select Record Rewind Play F. Forward Pause Stop / Eject
Record Safety Tab
DECK1 DECK2
MENU
0000 9A
/
•E NT ER
TIMER EVENTS OVERLAP
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16
Please review the events
from the Select Event
menu and remove one
using the CLEAR key
_____________________________________
SET TIMER to Continue
MENU to Quit
Overlapping Events
Two or more events are programmed to occur at the
same time:
• When you program a new event, the VCR checks
all timer events for conflicts. If two events overlap,
you will be prompted to either delete one of the
events, or allow them to overlap.
• If events overlap, the first event will be completely
recorded, then the next event will start and the
remainder of that event will be recorded.
SELECT EVENT [1-16]:01
1 10:30 PM On Wednesdays
1H30M Ch10 Deck1 Auto
2 : 9:00 AM On Sun Dec/06
0H30M Line1 Deck2 SP
3 : 7:00 PM On Mon-Fri
2H00M Line2 Deck2 SLP
4 : 12:15 PM On Everyday
0H15M Ch06 Deck1 Auto
/ = Move = Sel MENU=Quit ➔
➔
➔
➔