Go-Video DDV9355 - Manual (Page 56)

7 - RECORDING FEATURES 47
7 - Recording Features
You can record a TV show in
progress by inserting a blank
tape and pressing the Record
button. You can even add time
in fixed 30-minute increments
by pressing the Record button
repeatedly.
Note: Be sure your videotape
has a Record Safety Tab. If the
tab is missing, you can cover
the opening with a small piece
of tape. Warning: Do not cover
this opening unless you are
sure you want to record over
the tape.
1
2
3
Insert Tape
Insert a blank VHS tape into either deck.
Select a Channel to Record
Use the 0–9 buttons or the Channel Up/
Down arrow keys to select the desired
channel.
Start Recording
Press the Record button. For options while
a recording is in progress, see Recording
Options on the next page.
Notes:
• Be sure the TV is set to channel 3 or 4
(whichever the switch is set to on the
back of the VCR).
• Make sure the TV/VCR button on the
front panel is set to VCR (the VCR icon
will appear on the front panel display).
• Be sure the tape is long enough to record
the entire program. To change the
recording speed, see page 50.
1 2 3
4 5 6
7 8 9
0
•MUTE •LCV •VOL •CH
100+
REPEAT
AUTO
SHUTTLE
TRK TRK
F.ADV/SKIP
POWER
•TV
VCR
C OP Y TAPE
SLOW
TV/VCR
7 8
0 100+
REPEAT
SHUTTLE
F.ADV/SKIP
9
•MUTE •LCV •VOL •CH
TV/VCR
SP /SL P SET TIME R SCENE CLEAR
CLK/ CTR
REC
TV VIE W SEARCH/INDEX •DISP
LAY
TITLE
000 09A
•E NT ER
Or
Copy Tape
Deck Deck
Power
Deck Select Record Rewind Play F. Forward Pause Stop / Eject
Record Safety Tab
Basic Recording