Go-Video DDV9355 - Manual (Page 26)

3 - THE DUAL - DECK SYSTEM 17
Front Panel Display
Deck Two Tape Status —
Graphically shows you
the status of the tape in
Deck 2; i.e. Stop, Play,
Rewind, etc.
00:00:00 — Shows you the current time,
the tape counter, or the time remaining
until the end of the tape in the active
deck, as set by the CLK/CTR button. Also
briefly displays the active deck function;
i.e Stop, Play, Rewind, etc.
Tape Speed — (SP, SLP)
Shows you the current
Playback or Record Speed for
each deck.
Deck One — Lights to
show you that Deck One
is active.
VCR — Lights to show you that the
Dual-Deck is in VCR mode; i.e.
what you see on screen is coming
from the VCR and NOT the televi-
sion, as set by the TV/VCR button.
Timer — Lights to show
you that a Timer Record-
ing is stored in memory.
Blinks if there is a Timer
Recording error.
Copy — Lights to show
you that a tape is being
copied. Blinks if the
Copy is Paused.
Deck Two — Lights to
show you that Deck 2 is
active.
Deck One Tape Status —
Graphically shows you the
status of the tape in Deck 1;
i.e. Stop, Play, Rewind, etc.
The Front Panel Display shows
you the current status of your
Dual-Deck VCR.