Go-Video DDV9355 - Manual (Page 70)

9 - EDITING FEATURES 61
9 - Editing Features
1
2
Insert Source Tape
Put the tape with your unedited source
material in Deck 1.
Insert Target Tape
Put your blank tape in Deck 2. To ensure
quality edits, it is best to record on blank or
pre-formatted tapes. Tip: You can pre-
format your tapes by recording the line
input over the entire tape with no signal.
Review Source Tape (optional)
Make a list of the scenes you wish to use in
your final movie with their beginning and
ending tape counter positions. Reorder the
scenes if desired.
Open “Main Menu”
Press Menu.
Copy Tape
Deck Deck
Power
Deck Select Record Rewind Play F. Forward Pause Stop / Eject
Copy Tape
Deck Deck
Power
Deck Select Record Rewind Play F. Forward Pause Stop / Eject
3
4
There are two ways to edit
movies with the Dual-Deck
VCR:
1. You can use the 8-Scene
Editor to automatically as-
semble up to 8 scenes by
marking their beginning and
ending points; see instructions
at right.
2. You can use the Sync Edit
feature, which allows you to
manually cut unwanted scenes
while copying a tape; see page
64.
DECK1 DECK2
MENU
0000
9A
/
•E NT ER
MAIN MENU
1 EZ Copy On
2 : Child Lock Off
3 : Timer Recording
4 : 8-Scene Edit List
5 : Setup Titler Message
6 : Language/Langue/Idioma
/ To Move To Select
MENU to Quit
Hold MENU Key For Setup
➔
➔ ➔
➔
8-Scene Editor