Go-Video DDV9355 - Manual (Page 38)

4 - TUNER AND CHANNEL LIST 29
4 - Tuner & Channel List
Broadcast television comes
into your home from one of
two sources: over the air via
antenna, or through a cable via
a local CATV (Community
Antenna Television) provider
or Satellite. The Tuner Band
setting allows you to specify
which source you are using.
Use this setting only if Auto
Setup detected the incorrect
band, i.e. channels are coming
in on the wrong channel
numbers. 1
2
3
Open “Setup Menu”
Press and hold the Menu button for 3 seconds.
Select “Tuner & Channel List”
Press 3.
Set “Tuner Band “
Press the right arrow to select from the
following options:
• Auto — Automatically detects the Tuner
Band.
• Antenna — Specifies that you are using an
indoor or outdoor VHF/UHF antenna.
• Cable — Specifies that you are using either
Community Antenna Television (CATV, or
cable) or a Satellite receiver.
DECK1 DECK2
MENU
0000 9A
/
•E NT ER
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
•TV
VCR
TV/VCR
DECK1 DECK2
MENU
0000 9A
/
•E NT ER
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ To Move To Select
MENU To Quit
➔
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels
No
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
Auto
Antenna
Cable
➔
Tuner Band