Go-Video DDV9355 - Manual (Page 53)

44 DUAL - DECK USER ’ S GUIDE
Sequential/Loop Playback
You can insert two tapes in
your Dual-Deck VCR and have
them play sequentially or in a
continuous loop. For example,
you may rent a movie that
comes on two videotapes and
watch them seamlessly one
after the other. You may also
set two sales or training tapes
to play in a continuous loop. 1
2
Open “Setup Menu”
Press and hold the menu button on the
remote control for 3 seconds.
Select “Dual-Deck Features”
Press 4.
Set “Playback Mode”
Press 2 to select from the following options:
• Normal — Tapes play normally (default
setting).
• Seq (Sequential) — When the tape in
Deck 1 finishes playing, the tape in Deck
2 will begin playing automatically.
• Loop — When the tape in Deck 1 finishes
playing, the tape in Deck 2 will begin
playing automatically and Deck 1 will
rewind. When the tape in Deck 2 finishes
playing, the tape in Deck 1 will play
again. This process will repeat continu-
ously until you press Stop on the deck in
Play.
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
•TV
VCR
TV/VCR
DECK1 DECK2
MENU
0000 9A
/
•E NT ER SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ To Move To Select
MENU To Quit
➔
DUAL-DECK FEATURES
1 Remote Eject On
2 : Playback Mode Normal
3 : Auto Play / Rewind Rew
4 : Panel Display Auto
5 : Screen Display On
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔
DUAL-DECK FEATURES
1 : Remote Eject On
2 Playback Mode Normal
3 : Auto Play / Rewind Rew
4 : Panel Display Auto
5 : Screen Display On
____________________________________
/ = Move = Sel MENU=Quit ➔
➔
➔
➔
Normal
Seq
Loop
3
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
•TV
VCR
TV/VCR