Go-Video DDV9355 - Manual (Page 62)

7 - RECORDING FEATURES 53
Date/Time Stamp
The Date/Time Stamp allows
you to overlay the date, time,
and record source at the start
of, or continuously throughout,
your recordings. You can use
the stamp on all recordings or
on timer recordings only. The
stamp will not appear, how-
ever, when you copy a tape. 1
2
Open “Setup Menu”
Press and hold the Menu button for 3 seconds.
Select “Copy/Record Settings”
Press 2.
Set “Date/Time Stamp”
Press 4 repeatedly to set Date/Time Stamp to:
• Timer — The date, time, and record source
will appear briefly at the start of all timer
recordings only (default setting).
• Cont (Continuous) — The date, time, and
record source will appear continuously over
all recordings. The On-Screen Display and
Menu system will be disabled if this setting
is on. Press Stop on the recording deck to
restore normal on-screen functions.
• All — The date, time, and record source will
appear briefly at the start of all recordings
except copies.
• Off — The Date/Time Stamp is disabled.
3
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ To Move To Select
MENU To Quit
➔
COPY AND RECORD SETTINGS
1 Copy Mode Auto
2 : Speed Matching On
3 : Copy Audio Insert Off
4 : Date/Time Stamp Timer
5 : Deck1 Rec Source Auto
6 : Deck2 Rec Source Auto
7 : Record Mode Normal
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
•TV
VCR
TV/VCR
COPY AND RECORD SETTINGS
1 : Copy Mode Auto
2 : Speed Matching On
3 : Copy Audio Insert Off
4 Date/Time Stamp Timer
5 : Deck1 Rec Source Auto
6 : Deck2 Rec Source Auto
7 : Record Mode Normal
____________________________________
/ = Move = Sel MENU=Quit ➔ ➔ ➔
➔
Timer
Cont
All
Off
DECK1 DECK2
MENU
0000
9A
/
•E NT ER
1 2 3
4 5
7 8 9
AUTO
SHUTTLE
TRK TRK
POWER
C OP Y TAPE
SLOW
6
•TV
VCR
TV/VCR
Ch 12
Thu Jan 13, 2000 12 : 34 PM
Sample Date/Time Stamp