GSI Outdoors AUTOFLOW 2TF - Manual (Page 19)

2000 Autoflow
19
Airswitch
1. On either side of the master fan/
heater, drill one 3/4” hole even
with the fan/heater unit in a val-
ley on the bin sidewall.
2. Insert the airswitch probe
through the 3/4” hole.
3. Position the housing so the cord
exits the housing horizontally,
and the vents open downward.
4. Use four self drilling screws to
mount the housing to the bin
sidewall.
5. Caulk between the housing and
the sidewall to seal.
Airswitch mounted on the bin sidewall.
INSTALLATION