GSI Outdoors AUTOFLOW 2TF - Manual (Page 4)

2000 Autoflow
4
Roof Damage Warning and Disclaimer
WARNING! BE ALERT!
Personnel operating or working
around electric fans should read this
manual. This manual must be
delivered with the equipment to its
owner. Failure to read this manual
and its safety instructions is a
misuse of the equipment.
The symbol shown is used to call your
attention to instructions concerning
your personal safety. Watch for this
symbol; it points out important safety
precautions. It means "ATTENTION",
"WARNING", "CAUTION", and
"DANGER". Read the message and
be cautious to the possibility of per-
sonal injury or death.
Safety Alert Symbol
GSI DOES NOT WARRANT ANY ROOF DAMAGE
CAUSED BY EXCESSIVE VACUUM OR INTER-
NAL PRESSURE FROM FANS OR OTHER AIR
MOVING SYSTEMS. ADEQUATE VENTILATION
AND/OR "MAKEUP AIR" DEVICES SHOULD BE
PROVIDED FOR ALL POWERED AIR HANDLING
SYSTEMS. GSI DOES NOT RECOMMEND THE
USE OF DOWNWARD FLOW SYSTEMS (SUC-
TION). SEVERE ROOF DAMAGE CAN RESULT
FROM ANY BLOCKAGE OF AIR PASSAGES. RUN-
NING FANS DURING HIGH HUMIDITY/COLD
WEATHER CONDITIONS CAN CAUSE AIR EX-
HAUST OR INTAKE PORTS TO FREEZE.
Thank you for choosing a Top Dry Series 2000
Autoflow unit. It is designed to give excellent per-
formance and service for many years.
This manual describes the installation for all
standard production Top Dry Series 2000 single fan,
multi-fan and 2000 Series Autoflow units. Differ-
ent models are available for liquid propane or natu-
ral gas fuel supply, with either single phase 230 volt,
or three phase 208, 220, 380, 460 or 575 volt elec-
trical power.
The principal concern of the GSI Group, Inc.
("GSI") is your safety and the safety of others asso-
Series 2000 Autoflow Installation & Operating Instructions
ROOF WARNING, OPERATION & SAFETY
As owner and/or operator, it is your responsi-
bility to know what requirements, hazards and pre-
cautions exist, and to inform all personnel associ-
ated with the equipment, or who are in the fan area.
Avoid any alterations to the equipment. Such alter-
ations may produce a very dangerous situation,
where serious injury or death may occur.
ciated with grain handling equipment. This manual
is written to help you understand safe operating
procedures, and some of the problems that may be
en-countered by the operator or other
personnel.