Gaggia Titanium - Manual (Page 39)

ENGLISH
•  •
RINSING CyClE
With this function, all the parts involved in the coffee dispensing
process undergo a washing cycle with water.
During the wash cycle it is recommended that a person
be on hand to supervise the operation. Before per-
forming the rinsing cycle fill the water tank.
• Select the function by pressing the key “∧” or “∨”:
RINSING CYCLE
• Press the key “MENU/OK” to start the rinsing cycle, the display
shows:
RINSING CYCLE
The machine brews about half quantity of the water contained in the
tank from the dispenser.
Then the cycle stops automatically, and the display shows:
SELECT PRODUCT
READY FOR USE
FACTORy SETTINGS
This function allows you to restore all the machine operating parameters
originally set by the manufacturer.
• After accessing the programming mode, press “∧” or “∨” to select
the function:
FACTORY SETTINGS
then enable it by pressing “MENU/OK”. The following indication
will appear:
FACTORY SETTINGS
NO
• Choose whether you want to restore the factory settings by pressing
“∧” or “∨” and press “MENU/OK” to confirm your selection.
Caution: when you restore all the factory settings, you
will lose any custom settings you have made on the
machine.
14 LEgAL INfoRmATIoN
• This instruction book contains the information you need in order to
use and upkeep your appliance correctly.
• The information should be viewed as a guideline for using and
upkeeping your coffee maker in safety. The information is not
exhaustive. For additional information or for information on topics
not covered or inadequately covered in this instruction book, please
contact an authorized service centre or the manufacturer directly.
• In addition, it should be noted that these instructions do not form
part of a previous or existing agreement, legal contract or similar
and that the information is not changed by any other document.
• All the manufacturer’s obligations and liabilities are based on the
contract of sale, which also specifies all the warranty terms and
conditions.
• The warranty terms and conditions are neither limited nor extended
on the basis of this instruction book.
• This instruction book contains information protected by copyright.
• This instruction book may not be photocopied or translated into
other languages without the explicit written consent of the manu-
facturer.
15 scRAPPINg
• Make unusable any appliances no longer in use.
• Detach the plug from the wall outlet and cut the electric cord.
• Deliver scrapped appliances to a suitable waste disposal facility.
This product complies with EU Directive 2002/96/EC.
The symbol on the product or on its packaging indicates
that this product may not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal
service or the shop where you purchased the product.