Operating the 16x16 dvi matrix – Gefen DVI MATRIX EXT-DVI-16416 User Manual
Page 16
Advertising
12
Entering Standby Mode
Entering Standby mode will place the matrix in a low power-consumption state.
1. Simultaneously press and hold the Select and Cancel buttons.
2. The matrix will power-down and go into standby mode.
When the matrix is in standby mode, the power indicator on the front-panel will flash
bright red until standby mode is disabled.
OPERATING THE 16X16 DVI MATRIX
Press Select
and Cancel
Simultaneously
GEFEN
16x16 DVI MATRIX
Advertising