Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 26)

22
RS-232 / TELNET / UDP COMMANDS
IP / Telnet Configuration
Command Description
#ipconfig Displays all TCP/IP settings
#resetip Resets IP configuration to factory settings
#set_http_port Sets the Web server listening port
#set_tcp_term_pass Sets the TCP terminal password
#set_tcp_term_port Sets the Telnet listening port
#set_udp_port Sets the local UDP listening port
#set_udp_rip Sets the remote UDP IP address
#set_udp_rport Sets the remote UDP port
#sgateway Sets the IP gateway address
#show_tcp_term_pass Displays the current TCP password for login
#sipadd Sets the IP address of the matrix
#snetmask Sets the IP network mask
#use_tcp_term_pass Enables / disables password prompt for TCP
sessions
#use_udp_access Enables / disables UDP listening