Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 65)

61
Critical Malfunctions
Temperature Failure
If the measured system temperature exceeds 85° C, the following message will be
displayed on the LCM:
Power Failure
If the power reading exceeds the tolerance rating (greater than 120% or less than 80%),
the following message will be displayed on the LCM:
In both cases, the Matrix will stop working and should be powered-down immediately
and contact Gefen Technical Support under the Asking for Assistance section, at the
beginning of this manual.
WARNING MESSAGES
SYSTEM FAILURE!
SYSTEM FAILURE!