Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 40)

36
RS-232 / TELNET / UDP COMMANDS
#help Command
The #help command displays help on the specified command. If param1 is not specified,
then the full list of commands is displayed.
Syntax:
#help [param1]
Parameters:
param1
Command name
Example:
#help #callpreset
Cmd #callpreset: Recall a routing and mask state preset
Syntax: #callpreset param1
Param1 = 1-16 (preset)
e.g: #callpreset 2
#lock_fo Command
The #lock_fo enables/disables the power lock state. Enabling this feature will store the +5V
status for each input prior to shutting down the matrix. This preserves the +5V state when
the unit is restarted.
Syntax:
#lock_fo param1
Parameters:
param1
State [0 ... 1]
Value Meaning
0 Disable power lock
1 Enable power lock
Example:
#lock_fo 0
Disable Lock power mode