Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 42)

38
RS-232 / TELNET / UDP COMMANDS
#set_output_name Command
The #set_output_name command provides a name to the selected output. For example,
“Output 1” could be renamed as “HDDisplay”. The maximum string length for param2 is
15 characters. Special characters and spaces are not permitted. If required, use the
underscore character (“_”) to separate characters.
Syntax:
#set_output_name param1 param2
Parameters:
param1
Output [1 ... 16]
param2 Name
Example:
#set_output_name 3 display_3
display_3 is assigned to output 3
#show_temp Command
The #show_temp command displays the board temperatures to the screen.
Syntax:
#show_temp
Parameters:
None
Example:
#show_temp
Temperature near cross point top side is 50
Temperature near cross point bottom side is 44 C degree
Temperature on input board is 43 C degree