Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 22)

18
RS-232 / TELNET / UDP COMMANDS
#edidbatolo Command
The #edidbatolo command reads the downstream EDID and stores it to any local input.
Syntax:
#edidbatolo param1 param2 [param3...param9]
Parameters:
param1
EDID bank offset [1 ... 5]
param2 Input [1 ... 16]
Notes:
If param2 = 0, then the EDID in the specified bank is copied to all eight inputs.
#ediddetolo Command
The #ediddetolo command stores the Default EDID (640x480) in the specified Local EDID
inputs.
Syntax:
#ediddetolo param1 param2 param3...param9
param1
Input [1 ... 16]
Notes:
If param1 = 0, then all 16 DVI inputs will be set to the Default EDID.