Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 46)

42
RS-232 / TELNET / UDP COMMANDS
m Command
The m command displays the routing status in tabular form. Do not precede this command
with the “#” symbol.
Syntax:
m
Parameters:
None
Example:
m
Output | Input | HPD | Status
----------------|----------------|-------|--------
Output_1| Input_1| LOW | ACTIVE
Output_2| Input_1| LOW | ACTIVE
Output_3| Input_1| LOW | ACTIVE
Output_4| Input_1| LOW | ACTIVE
Output_5| Input_1| LOW | ACTIVE
Output_6| Input_1| LOW | ACTIVE
Output_7| Input_1| LOW | ACTIVE
Output_8| Input_1| LOW | ACTIVE
Output_9| Input_1| LOW | ACTIVE
Output_10| Input_1| LOW | ACTIVE
Output_11| Input_1| LOW | ACTIVE
Output_12| Input_1| LOW | ACTIVE
Output_13| Input_1| LOW | ACTIVE
Output_14| Input_1| LOW | ACTIVE
Output_15| Input_1| LOW | ACTIVE
Output_16| Input_1| LOW | ACTIVE
----------------|----------------|-------|--------
GEFEN PRO
Dynamic EDID mode
RMT_IR - SW1=0,SW2=0