Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 33)

29
RS-232 / TELNET / UDP COMMANDS
#use_tcp_term_pass Command
The #use_tcp_term_pass command enables / disables the password prompt at the
beginning of a session. The default setting is disabled. This feature can also be enabled or
disabled through the Web GUI (see page 54).
Syntax:
#use_tcp_term_pass param1
Parameters:
param1
State [0 ... 1]
Value Meaning
0 Disable password
1 Enable (force) password
Example:
#use_tcp_term_pass 1
TCP Terminal password at login is set to ON
#use_udp_access Command
The #use_udp_access command enables / disables UDP listening.
Syntax:
#use_udp_access param1
Parameters:
param1
State [0 ... 1]
Value Meaning
0 Disable password
1 Enable (force) password
Example:
#use_udp_access 1
UDP access is set to ON