MITSUBISHI ELECTRIC CP900E User Manual
Page 42
42
ADJUSTMENTS & SETTINGS (MAIN MENU)
PRINT Print setting display
GRAD (Gradation)
Adjusts the gamma curve of images.
Selects the gamma curve among 3 kinds of the settings.
ES
Mainly when connecting to endoscope
ECHO
Mainly when connecting to ultrasound diagnostic equipment
NOR
Mainly when connecting to other equipment
•
Only NOR is available when using CK900S4P, CK900L4P, CK900S4P(HX)EU or
CK900L4P(HX)EU or selecting THERMAL : ON.
APT (Aperture)
Controls apertures and reinforces or softens the contour of image.
S (SOFT)
Softens the contour.
N (NORMAL)
Does not perform APT.
H1 (HARD 1)
Reinforces the contour.
H2 (HARD 2)
Reinforces the contour more.
DIR (Print Direction) Selects printing direction. The left and right margin sizes will be
different on L size paper.
NOR
The margin is made on the lower position.
REV
The margin is made on the upper position.
MIRROR
Selects the mirror (left/right inversed) prints.
OFF
Normal print
ON
Mirror print
PRN SPEED (PRINTING SPEED) Sets the printing speed.
FAST
High speed printing (S size: 1280 dots (100 mm) x 600 lines
(75 mm))
NORMAL
Prints lines in double density. (S size: 1280 dots (100 mm) x
1200 lines (75 mm))
•
Only NORMAL is available when using CK900S4P(HX)EU or CK900L4P(HX)EU or
selecting IMAGES : 2S.
Only FAST is available when selecting THERMAL : ON.
GRAD
ES/ECHO/NOR
APT
S/N/H1/H2
DIR
NOR/REV
MIRROR
OFF/ON
PRN SPEED
FAST/NORMAL
Example of SIZE, DIR and MIRROR setting
(This image is limited in printing with white by SIZE setting.)
When the values of
TOP and RIGHT are
small
When the values of
BOTTOM and LEFT
are small
When the values of TOP
and RIGHT are small and
DIR is REV
When the values of TOP
and RIGHT are small and
MIRROR is ON
Standard print
When the values of TOP
and RIGHT are small and
MIRROR is ON and DIR
is REV