MITSUBISHI ELECTRIC CP900E - Manual (Page 57)

57
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS
FEA
TURES
PREP
ARA
TION
OTHERS
TROUBLE- SHOOTING
1 1 1 1 1
Press OPEN button to pull out the printing mechanism.
When it is not working, turn off the power once. Then try to press OPEN button again.
2 2 2 2 2
Remove the ink cassette with ink sheet.
3 3 3 3 3
Remove the print paper as shown right.
4 4 4 4 4
Cut the defective part of the print paper with scissors.
5 5 5 5 5
Cut both edges of the print paper.
6 6 6 6 6
Install the print paper. (Refer to pages 17-18.)
NOTE
To feed the print paper, press MEMORY button while pressing MONITOR button.
When carrying out this procedure, make sure to press MONITOR button first.
If MEMORY button is pressed first, a new image will be stored in memory and the previously
memorized image will be erased.
OVERCOMING PAPER JAMS
1
2