Multi-Tech Systems RAS96 User Manual
Page 59
5
E1 Daughter Card
CommPlete Communications Server
51
A:\# e1setup 9b
Use settings from:
1.
Use Active Settings (pre-configured card)
2.
User System Defaults (new card)
3.
User Stored Settings (swapping cards)
Enter Selection (q(uit), <1>): 3
1.
Channel Polling Interval (Sec) : 20
2.
Error Threshold : 10
3.
Disconnect Timeout (sec) : 11
4.
Framing Format: CRC4
5.
Line Coding: Alternate Mark Inversion (AMI)
6.
Signal Options : R2 MF
7.
DNIS-digits (1-64 or 0 for auto): 0
8.
Country Selection : ITU
9.
Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>): 6
Signal Options
1.
R2 Digital
2.
R2 MF
Enter Selection (-(previous), <2>): -
1.
Channel Polling Interval (Sec): 20
2.
Error Threshold : 10
3.
Disonnect Timeout (sec) : 11
4.
Framing Format : CRC4
5.
Line Coding : Alternate Mark Inversion (AMI)
6.
Signal Options : R2 MF
7.
DNIS - digits (1-64 or 0 for auto) : 0
8.
Country Selection : ITU
9.
Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>): 7
DNIS - digits (1-64 or 0 for auto) (-(previous), <0>): -
1.
Channel Polling Interval (Sec) : 20
2.
Error Threshold : 10
3.
Disconnect Timeout (sec) : 11
4.
Framing Format : CRC4
5.
Line Coding : Alternate Mark Inversion (AMI)
6.
Signal Options : R2 MF
7.
DNIS-digits (1-64 or 0 for auto) : 0
8.
Country Selection : ITU
9.
Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>: 8