Multi-Tech Systems RAS96 - Manual (Page 60)

RAS96 RASCard User Guide
CommPlete Communications Server 52
Country Selection
1. ITU
2. India
3. Mexico
4. Hungary
5. China
Enter Selection (-(previous), q(uit), d(one), <1>): -
1. Channel Polling Interval (Sec) : 20
2. Error Threshold : 10
3. Disconnect timeout (sec) : 11
4. Framing Format : CRC4
5. Line Coding : Alternate Mark Inversion (AMI)
6. Signal Options : R2 MF
7. DNIS - digits (1-64 or 0 for auto) : 0
8. Country Selection : ITU
9. Line Buildout : 120 Ohm
Enter Selection (-(previous), q(uit), d(one), <1>): q
3. Use the E1CFG command to send the new configuration information to the E1
Daughter Card.
4. Enter the E1STATUS command again to check the status of the E1 Daughter card.
A:\#e1status 9b
E1 Card Status:
Channel Polling Interval (Sec) : 20
Error Threshold : 10
Disconnect Timeout (sec) : 11
Framing Format : CRC4
Line Coding : Alternate Mark Inversion (AMI)
Signal Options : R2 MF
DNIS-digits (1-64 or 0 for auto):0
Country Selection: ITU
Line Buildout : 120 Ohm
LED Information : Online
Model : RAS9600-E1
Version : 2.00c/1.06
Note that the LED Information line now indicates that the E1 card is online with
no faults registered. The A:\ # prompt is displayed. You can select q to quit re-
provisioning, or enter another E1 command.