Multi-Tech Systems MT5634MSV - Manual (Page 16)

MessageSaver User Guide
8
J8 Speaker Mode
J8
Closed: Stereo (default)
Open: Mono
Figure 2-2. Location of speaker jumper.
Changing the Speaker Jumper
The speaker jumper (J8) is next to the external speaker jack (see Figure 2-2).
• To use the MessageSaver with a monophonic external speaker, remove the
jumper plug from the J8 jumper pins. You can store it by placing it on one
jumper pin.
• To use the MessageSaver with a stereo speaker or sound card, place the jumper
plug on both pins of the J8 jumper. This is the factory default position.