Multi-Tech Systems MT5634MSV - Manual (Page 74)

MessageSaver User Guide
66
Recording an Announcement
Announcements are used to greet and guide the caller. You can use the pre-recorded
announcements, or you can record your own custom announcements.
1. In the Answerphone Setup dialog box, click to open the Choose an an-
nouncement dialog box.
2. Select the record peripheral (modem or sound card).
3. Click to start recording.
4. Click to stop recording.
5. The Announcement Description dialog box prompts you to type a label for the
announcement. This label should allow you to readily identify the message in the
message list.
6. Click OK to exit the Announcement Description dialog box.
7. Close the Choose an announcement window.
Changing Recording Parameters
The Choose an announcement dialog box can be expanded to configure recording
parameters by clicking Parameters in the Display menu.
The Fast rewind, Fast
forward, Stop, Play, and
Pause buttons use the
same symbols as a con-
ventional tape recorder.
Opens and closes the
bottom half of the
window.
Select the playback and
recording device to be
used: modem speaker
or sound card.
Sound card and recording
parameters. Only used if a
sound card is connected.
Maximum recording
time for messages and
announcements.
Import and export voice files.