Multi-Tech Systems MT5634MSV - Manual (Page 34)

MessageSaver User Guide
26
Answering a Call with the Speakerphone
To answer an incoming telephone call using the speakerphone, or to switch to the
modem’s speakerphone for an existing call, using the front panel buttons:
1. Press the Speakerphone button to enter speakerphone mode.
2. After the call has been completed, press the Speakerphone button again to exit
speakerphone mode
3. To change the volume setting, press the Volume Up or Volume Down button.
Playing Voice Messages
The EC indicator flashes to indicate that you have voice messages waiting. To play
these messages:
1. Press the Play button to replay the voice messages. The MessageSaver announc-
es the number of received messages stored. It also announces the time that each
message was recorded. The date or year is announced only if it differs from the
date or year it is replayed.
2. When you have played the last message, the MessageSaver stops automatically.
Stopping the Play of Voice Messages
To stop playing messages at any time, press the Play button.
Listening to the Next Voice Message
To skip from the current message to the next message during replay, press the >>
button to fast-forward. When you release the >> button, the next message in the
queue is played.
Listening to the Previous Voice Message
To skip from the current message to a previous message during replay, press the <<
button to fast rewind. When you release the << button, the next message in the
queue is played.
Erasing a Voice Message During Replay
To erase the current message during replay, press the Delete button. The Message-
Saver announces message deleted and plays the next message.
Adjusting Speaker Volume
To adjust MessageSaver speaker volume when replaying any message:
• Press the + button to increase speaker volume.
• Press the - button to decrease speaker volume.