Multi-Tech Systems MT5634MSV - Manual (Page 72)

MessageSaver User Guide
64
Warning: The default message retrieval keys for Answerphone may be different
from those used when the MessageSaver is in Independent mode. If they are, you
should change the Answerphone keys to conform to those used in Independent
mode, as follows:
Replay message key: 7
Next message key: 9
Delete message key: 1
Play all messages key: 8
5. Click OK to exit the Answerphone Setup dialog box.
Setting Up the Answer Only Mode
1. In the Voice module, click to activate Answer Only mode. Then,
click to display the Answerphone Setup dialog box (see above).
2. In the Greeting message in answer only mode box, select the greeting message
to be used, or record a new message.
3. Click OK to exit the Answerphone Setup dialog box.
Setting Up the Answer/Record Mode
1. In the Voice module, click to activate Answer/Record mode. Then, click
to display the Answerphone Setup dialog box.
2. In the Greeting message in answer record mode box, select the greeting message
(announcement) to be used, or record a new message.
3. Select Remote dialup message retrieval if you want to be able to retrieve your
messages from a remote phone.
3. In the Access code box, enter a four-digit access code for remote dialup message
retrieval.
4. Click OK to exit the Answerphone Setup dialog box.
Messages that you have listened
to are archived. To listen to them
again remotely, use the Play all
messages key.